Access control systems provide authorized individuals safe and secure access in and out of various parts of your business while keeping unauthorized people out. They can range from electronic keypads that secure a single door to large networked systems for multiple buildings. Access Systems also greatly simplify management of your facility: no need to replace lost keys, hunt down old keys from terminated employees, or wonder who has access to which areas.


Door Access Control Locking Devices

In all locking systems, the locking device represents the physical security barrier. Locking devices include Magnetic Locks (Maglocks), Electric strikes, Deadbolts, Magnetic Shear Locks and Electrified locksets. These devices are mounted on the door and door casing. Examples of Locking Device types follow. ‘Clicking’ on any of the device photos will open a new window with direct access to pricing, and product datasheets for further and more detailed reference.

Electromagnetic Lock Electric Strike Electric Deadbolt Magnetic Shear Lock Electrified Lockset
Maglock Strike Deadbolt Shear Lock Lockset


  • Magnetic Locks electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and armature plate. By attaching the electromagnet to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate holding the door shut. Unlike an electric strike a magnetic lock has no interconnecting parts and is therefore less suitable for super high security applications because it is possible to bypass the lock by disrupting the power supply. Nevertheless, the strength of today’s magnetic locks compares well above that of conventional door locks and they cost less than conventional light bulbs to operate. Power supplies incorporating a trickle-charged lead-acid battery pack should be used to retain security for short-term power outages. Magnetic locks possess a number of advantages over conventional locks and electric strikes. For example, their durability and quick operation can make them valuable in a high-traffic office environment where electronic authentication is necessary.



  • Easy to install: Magnetic locks are generally easier to install than other locks given there are no interconnecting parts.
  • Quick to operate: Magnetic locks unlock instantly when the power is cut allowing for quick operation in comparison to other locks.
  • Suffer less damage: Magnetic locks may also suffer less damage from multiple blows than conventional locks.



  • Requires continuous power: To remain locked, the magnetic lock requires a constant power source. The power drain of the lock is typically around 3 watts, far less than that of a conventional light bulb (around 60 watts), but it may cause security concerns as the device will become unlocked if the power source is disrupted. In comparison, electric strikes can be designed to remain locked should the power source be disrupted. Nevertheless, this behavior may actually be preferable in terms of fire safety.


  • Electric Strikes replaces the fixed strike faceplate often used with a latchbar (also known as a keeper). Like a fixed strike, it normally presents a ramped surface to the locking latch allowing the door to close and latch just like a fixed strike would. However, an electric strikes ramped surface can, upon command, pivot out of the way of the latch allowing the door to be pushed open (from the outside) without the latch being retracted (that is, without any operation of the knob) or while excited the knob or lever can be turned to allow egress from the secured area. Electric strikes generally come in two basic configurations:



  • Also called fail-locked or non-fail safe. In this configuration, applying electric current to the strike will cause it to open. In this configuration, the strike would remain locked in a power failure, but typically the knob can still be used to open the door from the inside for egress from the secure side. These units can be powered by AC which will cause the unit to “buzz”, or DC power which will offer silent operation, except for a “click” while the unit releases.



  • Also called fail-open. In this configuration, applying electric current to the strike will cause it to lock. In this configuration, it operates the same as a magnetic lock would. If there is a power failure, the door would open merely by being pushed/pulled open. Fail safe units are always run using DC power.


  • Electric Deadbolts are recommended for high security interior door and cabinet applications where electromagnetic locks are not required. Electric bolt locks include long life solenoid driven direct throw mortise bolts, some models offer right angle bolts for narrow frames and door stiles and surface mounted bolt locks for door and cabinet applications. Compatible with virtually any access control system, electromechanical bolt locks are available in failsafe and fail secure modes


  • Magnetic Shear Locks are recommended to provide superior failsafe holding force and aesthetics for most types of doors, including high profile frameless glass doors. Representing the latest evolution in the development of magnetic locks, shear locks incorporate several features to ensure that the door seamlessly locks and releases without hindrance.


  • Electrified Locksets look and function like a typical cylindrical or mortise style mechanical lock. However, incorporate internal solenoids to enable the lock and latch feature. Building and fire life safety code compliant for fire rated office doors, corridor doors, lobby doors, exit doors and stairwell doors. Whether failsafe or fail secure, controlled access and remote control capability is provided while the door stays latched even when unlocked, maintaining fire door integrity.